Turning The Projector Off; Focusing And Sizing The Projected Image - Vivitar DLP-2100X User Manual

Warning:
Never look into the lens when the lamp is on. This can damage your eyes. It is
especially important that do not let children to look into the lens.

Turning the Projector Off

1. To turn off the projector, press the
Power button (on either the Remote
Control or the Projector Control
Panel). The confirmation message
will appear on the screen for about
3 seconds.
2. Press the Power button again while the message is still showing on the screen.
To cancel the power OFF and resume projector's operation, please wait until the
message disappears from the screen.
3. After the fan has turned off automatically you may turn off the Power Switch.

Focusing and Sizing the Projected Image

After the image appears on the screen, check the focus and size whether it
fits properly on the screen.
To adjust the focus of the image, rotate the focus ring, which is the outer ring on
the projector's lens.
To adjust the size of the image, rotate the inner zoom ring, which is the inner ring
on the projector's lens; zooming out to make the image larger or zooming in to
make it smaller on the screen.
Projector
19