Table of Contents
Advertisement
LED COLOR
STATUS
Red
Flashing
Orange
Solid
MEANING
Error messages as the following:
1. There is a problem with the projector fan - the
projector cannot start up.
2. The projector lights failed after lighting 3 times by
itself.
3. The lamp has reached its end of life and must be
changed soon. (The LED flashes red around 1
minute) The lamp will continue to operate until it fails.
Change the lamp and reset the lamp time-counter.
In Standby mode, the projector's 15-pin D-SUB acts as
a system converter. User could select any different input
device to converter to PC monitor signal. User can press
the BY-PASS to select the projector by-pass mode (15-
pin D-SUB in and direct throughout to the15 pin D-SUB
for other monitor or equipment), in the throughout mode
the LED indicator stays orange. (lamp on)
Projector
21
Advertisement
Table of Contents
