Operation; Turning The Audio/Visual (A/V) Equipments On And Off; Turning The Projector On - Vivitar DLP-2100X User Manual

DLP
18

Operation

This section describes the following information about using your projector:
Turning the projector and A/V equipments on and off
Adjusting the projected image
Controlling the projector
Checking the status of the projector

Turning the Audio/Visual (A/V) Equipments On and Off

Always turn on the projector and related A/V equipments in the following order.
1. Projector
2. Computer
3. Video source
4. Audio source

Turning the Projector On

1. Plug the power cord into the side of the projector.
2. Insert the power plug into an electrical outlet.
3. Remove the projector lens cap.
4. Turn on the power switch on the side of the projector.
5. Press the Power button (on either the Remote Control or the Projector Control
Panel) to turn on the projector. When the LED indicator lights in green, the projecting
image gets full illumination.
6. After the image appears on the screen, adjust the focus and size for the projected
image to fit properly on the screen. Make any necessary image adjustments by
using the on-screen menus.
7. Run your presentation from your input source.