Table of Contents
Advertisement
DLP
26
Changing settings procedure (using either the Projector Control Panel or the Re-
mote Control):
1. Press the MENU button to display OSD menu.
2. Press the
3. To enter the sub-menu setting, press the
4. Press the
5. Press the
On the Auto Image (RGB Picture) and More Option (YPbPr Picture 1) sub-menus,
press the
6. After you have done with the adjustment of a sub-menu item:
a. To resume changing another sub-menu item: press the
b. To exit from the current menu: toggle the MENU button.
The following table provides details of the available sub-menus choices:
Sub-menu
Brightness
Contrast
H position
V position
Phase
Frequency
or
button to select PICTURE menu.
or
button to select the sub-menu item.
or
button to adjust the value of desired sub-menu item.
button to confirm the selection.
Option
Description
The higher the setting, the brighter the image.
The lower the setting, the darker the image.
The higher the setting, the greater the contrast.
The lower the setting, the lower the contrast.
Adjusts the horizontal position.
Adjusts the vertical position.
Removes unwanted vertical lines from a computer
image by matching the projector's internal clock to the
computer display signal.
Adjusts the display data frequency to match the
frequency of your computer's graphic card. When a
vertical flickering bar appears, use this function to make
an adjustment.
button.
or
button.
Advertisement
Table of Contents
