Operational Indicator (Led) - Vivitar DLP-2100X User Manual

DLP
20

Operational Indicator (LED)

There is one LED on the top of the projector to indicate the state of the projector and
the lamp. It provides valuable information about the projector:
LED COLOR
Green
Green
Red
STATUS MEANING
Solid The projector is powered and ready. The lamp is current
on and is projecting at maximum brightness.
LAMP (Turning on):
Flashing
When the Power button is pressed, the LED indicator
will flash (green) to indicate the lamp is turning on. The
projector will automatically light-up the lamp for another
2 times (1 minute interval).
LAMP (Turning off):
When turning off the lamp, the LED indicator will flash
(green) to indicate the projector is shutting down. At
the same time, the fan motor will cool down for 2
minutes, and then the LED indicator will turn red to
indicate the fan motor is turned off and the lamp has
cooled.
Note:
Do not unplug the power cable or turn the power switch
Off before the lamp LED becomes red. During the
cooling & warming up procedures the projector won't
accept any key in command.
Solid When main power is turned on, the projector is in
standby mode. (Lamp off)