Vivitar DLP-2100X User Manual page 28

Sub-menu Option
Sharpness Computer
Video
Color
Tint
Video Format Auto
NTSC
PAL
SECAM
Auto Image
Description
The higher the setting, the sharper the computer's
projection.
The lower the setting, the softer the computer's
projection.
The higher the setting, the sharper the video's
projection.
The lower the setting, the softer the video's projection.
Adjusts a projected image from black and white to fully
saturated color.
Adjusts the red-green color balance in the projected
image.
When Video Format is set to Auto, the projector attempts
(Video) to pick the video standard (NTSC, PAL or SECAM)
automatically based on the input signal it receives.
(The video standard options may vary depending on
your region in the world.)
If the projector is unable to detect the correct standard,
the colors might not look right or the image might ap-
pear "torn". If this happens, manually select a stan-
dard by clicking either the left or right navigation but-
ton and cycling through the standards.
Note:
If you already knew the video standard used in your
geographical area, it's best to manually select it.
The projector automatically adjusts tracking, signal
synchronization and vertical & horizontal position for
most computers (Auto Image does not apply to video
sources).
Note:
Some screen savers interfere with the operation of Auto
Image. If you're experiencing problems, try to turn your
screen saver off, then turning Auto Image off and back on.
Projector
27