External Control Panel - Vivitar DLP-2100X User Manual

DLP
8

External Control Panel

LED Indicator
Control Panel Button
MENU
AUTO
SOURCE
Cursor Controller
( /
Note:
The Infrared Remote Receiver (Front and Rear) allows the projector to accept signals
from the remote control. For best results, be sure to aim the control toward the sensor
without any obstructions between the two, and at an operative distance.
Indicates the state of the projector.
Turns the projector (or lamp) ON or OFF.
Displays (or hides) the on-screen control menus.
Automatically adjusts frequency and phase.
Manually selects an input source.
It can be used as a navigation controller to navigate
/ / ) the projector menus.
Scrolls up through the menu choices.
Scrolls down through the menu choices.
Increases the value setting on the selected sub-menus,
or confirms a menu selection.
Decreases the value setting on the selected sub-menus.