Electrical Specifications - Delta DVP-20PM Instruction Sheet

High-speed positioning, multi-function programmable logic controller

Hide thumbs Also See for DVP-20PM:

Applications manual (580 pages)

Applications manual (561 pages)

Table of Contents

...........................................................................

This instruction sheet only provides information on electrical specification, functions

and wiring. For detailed information on programming and instructions, please refer to

"DVP-PM Application Manual: Programming". For more information about the

optional peripherals, please see individual product instruction sheet or "DVP-PLC

Application Manual: Special Modules".

DVP-20PM is an OPEN TYPE device and therefore should be installed in an

enclosure free of airborne dust, humidity, electric shock and vibration. The enclosure

should prevent non-maintenance staff from operating the device (e.g. key or specific

tools are required for operating the enclosure) in case danger and damage on the

device may occur.

DO NOT connect the AC main circuit power supply to any of the I/O terminals, or it

may damage the PLC. Check all the wirings before switching on the power. Make

sure the ground terminal

interferences. DO NOT touch any terminals when the power is on.

Product Profile & Dimension

Communication

port cover

I/O terminal No.

Function card/

memory card cover

C OM2 (R S-485)

MAN U/A UT O switch

C OM1 (R S-232)

Battery socket

Battery