Appendix A.2. Viewing Diagnostic Information
•
Type the IP Address of the ProtoAir into the web browser or use the FieldServer Toolbox to
connect to the ProtoAir.
•
Click on Diagnostics and Debugging Button, then click on view, and then on connections.
•
If there are any errors showing on the Connection page, refer to
wiring and settings.
NOTE: The FieldPoP™ button
Cloud, Sierra Monitor's device cloud solution for IIoT. The SMC Cloud enables secure
remote connection to field devices through a FieldServer and its local applications for
configuration, management, maintenance. For more information about the SMC Cloud,
refer to the
SMC Cloud Start-up
Figure 24: Error Messages Screen
Figure
24) allows users to connect to the SMC
(see
Guide.
Page 28 of 43
Siemens ProtoAir Start-up Guide
for the relevant
Appendix A.3