LTPH-UM-1049-02, Issue 2
Clearing the History, Alarm, and Event Log Screens
Select Master Clear to clear the History, Alarm and Event Log screens after the system has been installed and is
functioning properly. This removes miscellaneous data acquired during the startup session and ensures that you
have meaningful data thereafter.
Monitor
Performance
Clear ALL performance, alarm and event log entries. Are you sure (Y/N)?
ID: xxxx--xxxx--xxxx--xxxx
To clear the Event Log, press
To clear an individual history or alarm screen, do the following:
1
Press
P
to select the Performance screen.
2
Press the
SPACEBAR
H2TU-R HDSL2), then press
3
Press the
SPACEBAR
48 Hour History, or 31 Day History), press
–
Selecting 31 Day History allows you to clear the Current, 25 Hour, 48 Hour, and 31 Day
performance history screens for the selected interface.
–
Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For
information about the DS1 and HDSL2 alarm screens, see
4
Press
L
to clear the screen.
To clear all history, alarm, and event log screens:
1
Press
C
to select the Config screen.
2
Use the
and
3
Press
Y
to clear all screens.
H2TU-C-319 List 4E
Event Log
Config
+-----------------------+
| Standard Options
| ADC Options
| Test Mode
| Date and Time
|
Master Clear
| Set Factory Defaults
+-----------------------+
08/01/2001 06:38:12
Figure 14. Config Menu - Master Clear
E
to select the Event Log screen, then press
to select an interface (H2TU-C DS1, H2TU-R DS1, H2TU-C HDSL2, or
ENTER
.
to select the type of statistics (Current, Alarm History, 25 Hour History,
arrow keys to select Master Clear.
January 9, 2002
Inventory
Report
Rlogon
-> |
-> |
-> |
-> |
|
|
H2TU-C
L
to clear the screen.
ENTER
after your selection.
Table 17 on page
Provisioning
Help
System: OK
45.
33