Provisioning
Clearing the History, Alarm, and Event Log Screens
Select Master Clear to clear the History, Alarm, and Event Log screens after the system has been installed and is
functioning properly. This removes miscellaneous data acquired during the startup session and ensures collection
of accurate and meaningful data thereafter.
Monitor
Performance
Clear ALL performance, alarm and event log entries.
ID: xxxx--xxxx—-xxxx--xxxx
To clear the Event Log, press
To clear an individual history or alarm screen, do the following:
1
Press
P
to select the Performance screen.
2
Press the
SPACEBAR
NET HDSL, H4DU-1 CPE HDSL, H4DU-2 NET HDSL, H4DU-2 CPE HDSL, or H4TU-R HDSL),
ENTER
then press
3
Press
↓
to select statistics.
SPACEBAR
4
Press the
48-Hour History, or 31-Day History), and press
—
Selecting 31-Day History allows you to clear the current, 25-hour, 48-hour, and 31-day
performance history screens for the selected interface.
—
Selecting Alarm History allows you to clear the alarm history screen for the selected interface. For
information about the DS1 and HDSL4 Alarm screens, see
L
5
Press
to clear the screen.
6
Press
Y
to confirm.
To clear ALL history, alarm, and event log screens by this method:
1
Press
C
to select the Config screen.
2
Use the
and
↑
3
Press
ENTER
4
Press
Y
to confirm (clear all screens).
24
Event Log
Config
+----------------------+
| Standard Options ->
| ADC Options
| BERT Generator
| Date and Time
|
Master Clear
| Set Factory Defaults |
+----------------------+
02/01/2002 12:30:01
Figure 10. Config Menu - Master Clear
E
to select the Event Log screen, then press
to select either interface (H4TU-C DS1, H4TU-R DS1, H4TU-C HDSL, H4DU-1
.
to select the type of statistics (Current, Alarm History, 25-Hour History,
arrow keys to select Master Clear.
↓
to activate.
September 12, 2003
Inventory
Report
Rlogon
|
->
|
->
|
->
|
|
Are you sure (Y/N)?
H4TU-C
L
to clear the screen.
ENTER
after your selection.
Table 11 on page
LTPH-UM-1031-03, Issue 3
Help
System:
OK___
36.
H4TU-C-319 List 1