ADC HiGain H2TU-C-319 List 3F Quick Installation
Line unit
Hide thumbs
Also See for HiGain H2TU-C-319 List 3F:
- User manual (88 pages) ,
- Quick installation (7 pages) ,
- Manual (2 pages)
Advertisement
Quick Links
Advertisement
Related Manuals for ADC HiGain H2TU-C-319 List 3F
Summary of Contents for ADC HiGain H2TU-C-319 List 3F
- Page 1 HiGain HiGain UICK NSTALLATION H2TU-C-319 L...
-
Page 2: Specifications
H2TU-C-319 L The H2TU-C-319 List 3F line unit is the Central Office (CO) side of a T1 transmission system. The H2TU-C, when used with an H2TU-R remote unit, transmits a 1.544 Mbps payload on one unconditioned copper pair over the full Carrier Service Area (CSA) range. -
Page 3: Installation
Select Inventory, then type the unit ID numbers. Change the settings of any system parameters, if necessary, by selecting Config, then Standard Options or ADC Options. (Configuration options and their current settings can be read from the front panel using the MODE pushbutton. - Page 5 OOPBACK ESTING Initiate loopback testing from the maintenance menus or use the MODE and LBK pushbuttons. The inband codes shown below can be sent by a test set. H2TU-R H2TU-C DSX-1 NREM Customer CLOC Network SMJK NLOC CREM Premises TLOS* Downstream Upstream * When enabled, TLOS is an automatic loopback...
- Page 6 (a) Front-panel codes scroll in the order listed. The configured selections follow each code. (b) Default values are in bold. Copies of this publication or the user manual (LTPH-UM-1144-xx) can be downloaded from the ADC website at www.adc.com. To order a hard copy, please contact your sales representative.
- Page 7 Service for details. Modifications Any changes or modifications made to this device that are not expressly approved by ADC DSL Systems, Inc. voids the user's warranty. All wiring external to the products should follow the provisions of the current edition of the National Electrical Code.