Table of Contents
Advertisement
fhf0mstr.book Page 1 Tuesday, April 20, 1999 10:39 AM
April 20, 1999 10:38 am
Chapter 2. Windows 95 and
Windows 98 Installation
Plug and Play Installation
Plug and play installation of the EtherJet CardBus Ready Port
Adapter with Modem is supported under Windows 98 and
Windows 95 Version 950b (OSR2) and later. Installation with
these versions of Windows is described in this chapter.
Note:
Windows 95 Version 950/950a are not supported with the
EtherJet CardBus Ready Port Adapter with Modem due
to limitations for CardBus multifunction (LAN and
Modem) devices.
Drivers Available
The following drivers for Windows 95 and 98 are supplied with
the EtherJet CardBus Ready Port Adapter with Modem:
•
NDIS3 driver (IBMC.SYS)
•
NDIS4 driver (IBMCN4.SYS)
•
32-bit ODI driver (IBMC.LAN) with promiscuous support
The NDIS3 driver IBMC.SYS is installed by default when you use
the procedures in this chapter. For NDIS4 instructions, see the
README file on the IBM CD-ROM.
32-bit ODI Driver
If your environment requires use of the 32-bit ODI client driver
under Windows 95 (as indicated by your network administrator),
see the Windows Help file HELPDOCS.HLP on the IBM CD-ROM
for instructions.
© Copyright IBM Corp. 1999
2-1
Advertisement
Table of Contents
Troubleshooting
