Appendix B. Specifications General Specifications; Ethernet Specifications - IBM 10/100 EtherJet CardBus Ready Port Adapter with 56K Modem Installation And Planning Manual

fhf0mstr.book Page 1 Tuesday, April 20, 1999 10:39 AM
April 19, 1999 10:55 am
Appendix B. Specifications
General Specifications
Model XWIN/002
Cabling:
100BASE-TX unshielded twisted pair for use on Category 5
(data grade) cabling; 10BASE-T unshielded twisted pair
(UTP)
Connector:
Operating Distance:

Ethernet Specifications

Type III CardBus PC Card
Ethernet:
Connectors:
Size:
Weight:
Temperature Range:
Operating:
Storage:
Humidity:
Memory:
Power Requirements:
10BASE-T
100BASE-TX
Modem only
10BASE-T+Modem
100BASE-TX+Modem
© Copyright IBM Corp. 1999
RJ-45
100 m (328 ft.)
IEEE 802.3 10 Mbps Ethernet; 802.3u 100 Mbps
RJ-45 (100BASE-TX/10BASE-T Ethernet),
RJ-11 (modem), RJ-11 (phone set pass-through)
86.0 mm x 54.0 mm x 10.5 mm
(3.37 in. x 2.13 in. x 0.413 in.)
36 g (1.3 oz)
32°F to 149°F (0°C to 65°C)
-4°F to 185°F (-20°C to 85°C)
95% maximum noncondensing
4 MB memory for dual V.90 and K56flex
operation
3.3 V DC, 74 mA idle,130 mA active,
110 mA typical
3.3 V DC, 150 mA idle, 165 mA active,
160 mA typical
3.3 V DC, 40 mA sleep, 240 mA active
3.3V DC, 280 mA active
3.3V DC, 340 mA active
B-1