Setting Full Duplex In Netware Servers; Setting Full Duplex In Windows 95 And Windows 98; Setting Full Duplex In Other Operating Systems - IBM Netfinity 10/100 Ethernet Adapters Installation Manual

Setting Full Duplex in NetWare Servers

For each adapter in AUTOEXEC.NCF, edit the LOAD command and add the
following options (you must include the equal sign for servers):
FORCEDUPLEX=2
SPEED=100 (or 10 if 10BASE-T)
For more information, refer to the readme file for NetWare computers.

Setting Full Duplex in Windows 95 and Windows 98

While running Windows 95 or WIndows 98:
1. Double-click IBMSet from the Control Panel.
2. Click Settings.
3. In the Network Speed list box, click 10 or 100, according to the speed of your
4. In the Duplex Mode list box, click Full.
5. Click OK.
6. Restart Windows.

Setting Full Duplex in Other Operating Systems

Refer to the OTHER.TXT readme file in the \OTHER directory on the IBM
Installation and Drivers CD-ROM or diskette. Open the file with any text editor.
18
Netfinity 10/100 Ethernet Adapters: Installation Guide
network.