Installing Under Windows 95 Osr2 And Windows 98 - IBM 10/100 EtherJet CardBus Ready Port Adapter with 56K Modem Installation And Planning Manual

fhf0mstr.book Page 2 Tuesday, April 20, 1999 10:39 AM
April 20, 1999 10:38 am
Installing under Windows 95 OSR2
and Windows 98
Windows 95 OSR2 (Version 950b) and later has limited support
for CardBus multifunction (LAN+modem) devices. The EtherJet
CardBus Ready Port Adapter with Modem includes IBM software
which enhances support for CardBus multifunction devices. See
the README file on the IBM CD-ROM for additional information
on this software and for complete details on installation under
OSR2.
Prompt for Updated VXD Files
On some machines, the program will detect that particular VXD
files from Microsoft may be out of date. If this happens, you will
be informed that it may be necessary to obtain more recent
versions of these files if the adapter does not work after you
reboot. The window message will read "One or more of your
system files are out of date. If after rebooting the adapter does
not work, it may be necessary to upgrade these files." If the
EtherJet CardBus Ready Port Adapter with Modem works after
rebooting your system it is not necessary to load the later
Microsoft files. The specific files are CBSS.VXD, PCI.VXD, and
PCCARD.VXD. A self-extracting installer named CBMFIX2.EXE
is available on the IBM CD-ROM.
Select Start Run. Then type path/CBMFIX2, where path/ is the
drive containing the IBM CD-ROM.
This installer will copy the CBSS.VXD Version 4.00.1118,
PCCARD.VXD Version 4.00.1119, PCI.VXD Version 4.00.1121
into the C:\Windows\System Directory. See the README file on
the IBM CD-ROM for additional information on these files.
2-2 EtherJet CardBus Ready Port Adapter with Modem