Table of Contents
Advertisement
Hardware Installation
Note Please refer to the user manual that came with your personal computer for detailed
installation instructions.
Use the following procedure to install your IBM WAN Adapters.
1.
Set the host computer system power switch to OFF and disconnect the
power cord.
2.
Locate a free PCI expansion slot.
3.
Insert and secure the board firmly into the expansion slot.
4.
Replace the power cord and turn the host computer system ON.
Software Installation
Refer to the Quick Start Card that came with the CD ROM for detailed
instructions on loading the Software Driver.
PCI System Setup
Peripheral Component Interconnect (PCI) system architecture has a design
feature termed Plug and Play. This feature automatically detects, identifies and
configures the currently installed devices each time the system is booted.
Therefore, whenever a WAN Adapter is installed (or removed) in a PCI system,
the Adapter is recognized and configured immediately upon restart.
3
Hardware Installation
Advertisement
Table of Contents
