Steering Harness; Steering Rubber Boot; Storage Cover Installation - BRP Sea-Doo GTX 2008 Series Predelivery Bulletin

1 2
F18F036
Unscrew [1] and lift throttle housing cover [2].
1
2
F18F046
From handlebar side, pull hose/cable and install
throttle cable [2] in throttle housing [1].
Reinstall throttle housing cover.
F18F056
Install throttle cable into throttle lever.
Predelivery

Steering Harness

Model(s): International except X
F16F026
Connect [1] steering harness connectors to main
harness connectors.
Secure with locking tie from predelivery kit or, in
some cases, use existing locking tie attached to
vent tube bracket.

Steering Rubber Boot

Model(s): International except X
sbl2006-002-107
Position rubber boot.

Storage Cover Installation

Model(s): All GTX, RXP and RXP-X International
Remove plastic wrapping over storage cover
assembly.
Remove access cover and storage basket from
storage cover assembly.
2008-1
SET-UP
1
17 / 29