5500 Series Power Options - Avaya 5000 Series Installation Manual

Installation fundamentals
Avaya Ethernet Routing Switch 5530-24TFD
This section details the power requirements of the Avaya Ethernet Routing Switch
5530-24TFD.
The following table lists the power specifications for the Ethernet Routing Switch 5530-24TFD.
Table 6: AC power specifications
Input current
Input voltage (rms)
Typical power consumption
Typical thermal rating
Maximum power consumption
Maximum thermal rating
Inrush current
Turn on condition
Efficiency

5500 Series power options

This section describes the available power options for Ethernet Routing Switch 5500 Series
switches.
Avaya Ethernet Power Supply 10
This module describes the Avaya Ethernet Power Supply 10.
The Ethernet Power Supply 10 is a DC power supply used with the AC power supply to provide
DTE power to all of the PoE ports.
38 Avaya Ethernet Routing Switch 5000 Series Installation
1.7 A at 120 VAC or 0.85 A at 240 VAC
100 to 240 VAC 50/60 Hz
125 W
427 BTU/Hr
150W
512 BTU/Hr
20 A 120 VAC at maximum load, 40 A 240
VAC at maximum load
1 second maximum after application of AC
power.
Important:
12 V output rise time, from 10 percent to
90 percent, shall be a maximum of 50 ms
and monotonic under all defined input and
output conditions.
70 percent minimum
December 2010