Preparing For Power Requirements Of The Switch - Avaya 5000 Series Installation Manual

Installation fundamentals
SFP model
1000Base-LX DDI SFP 1310 nm DDI LC connector
1000BASE-BX
bidirectional SFP
1000BASE-BX
bidirectional SFP
100Base-FX SFP
XFP Model
10GBase-LR/LW XFP
10GBASE-ER/EW
10GBase-SR XFP
10GBase-ZR/ZW XFP
10GBase-LRM XFP
See Avaya Ethernet Routing Switch 5000 Series Installation — SFPs and XFPs -
(NN47200-302) for a list of supported SFPs and your latest product-specific release notes.
Information contained in the Release Notes takes precedence over any information contained
in this document.

Preparing for power requirements of the switch

Navigation
• Avaya Ethernet Routing Switch 5510-24T and 5510-48T
• Avaya Ethernet Routing Switch 5520-24T-PWR and 5520-48T-PWR
• Avaya Ethernet Routing Switch 5530-24TFD
• Avaya Ethernet Power Supply 10
• Avaya Ethernet Redundant Power Supply 15
• Avaya Ethernet DC-DC converter module
36 Avaya Ethernet Routing Switch 5000 Series Installation
Description
1310 nm, single fiber LC (Must be paired with
AA1419070-E5)
1490 nm, single fiber LC (Must be paired with
AA1419069-E5)
1310 nm LC connector NOTE: Supported on the
5600 Series switches only.
Description
1-port 1310 nm SMF, LC connector
1-port 40km, 1550nm SMF, LC connector
1-port 850 nm MMF, LC connector
1550 nm SMF LC connector
1310 nm, up to 220 m over MMF, DDI
on page 38
on page 37
on page 38
on page 39
on page 39
Part
Number
AA1419049-
E5
AA1419069-
E5
AA1419070-
E5
AA1419074-
E6
Part
Number
AA1403001-
E5
AA1403003-
E5
AA1403005-
E5
AA1403006-
E5
AA1403007-
E6
on page 37
December 2010