Nortel CallPilot Series Upgrade Manual page 44

44 Chapter 3 Preparing the system for upgrade
Backing up your data
Copyright © 2007–2009, Nortel Networks
.
•
If you choose to back up to tape:
This process overwrites the existing data on the tape.
Insert the tape into the tape drive and click Next to start the
backup immediately. Proceed to the next step.
• If you choose to back up to disk:
Click Next to choose the backup device. The Full System Backup
- Select Backup Devices screen appears. Click List Devices.
Result:The screen displays the backup devices that are defined
on your CallPilot server.
— If no devices are listed, log on to CallPilot Manager and
define your backup devices (System > Backup/Restore
> Maintain and configure backup devices). Click List
Devices again. Select the backup device you want to use
and click Next to start the backup.
— If the list is populated, select the appropriate backup device
and click Next to start the backup.
Full System Backup - List Backup Devices
Nortel CallPilot
Upgrade and Platform Migration Guide
NN44200-400 01.12 Standard
5.0 24 April 2009
ATTENTION