Nortel CallPilot Series Upgrade Manual page 35

5
Copyright © 2007–2009, Nortel Networks
.
IF your platform
is unsupported
is supported
If you are upgrading from CallPilot 4.0 or earlier, the CallPilot 5.0
Upgrade Wizard checks if the computer name and database are
synchronized.
IF they
are not synchronized
are synchronized
Nortel CallPilot
Upgrade and Platform Migration Guide
NN44200-400 01.12 Standard
5.0 24 April 2009
Running the CallPilot 5.0 Upgrade Wizard 35
THEN
• the Platform Validation -
Unsupported Platform screen
appears.
•
proceed to
"Preparing the system for
migration" (page
•
the CallPilot 5.0 Upgrade
Wizard continues.
• continue to the next step.
THEN
• the Checking Computer Name
screen appears.
ATTENTION
When you click Next, the
wizard prompts you for
confirmation. If you click
Yes, the server automatically
restarts and your system
will be out of service. This
is particularly important if
you are running the CallPilot
5.0 Upgrade Wizard from a
remote location. You cannot
continue with the wizard until
the names are synchronized.
• Click Next to synchronize the
names.
• When the system restarts, you
must relaunch the CallPilot 5.0
Upgrade Wizard.
• When the system is in full
service, go back to
• the CallPilot 5.0 Upgrade
Wizard continues.
Chapter 5
79).
step 2.