Setting Up Dp720 Handset; Battery Information; Setting Up The Charge Station; Figure 5: Setting Up The Dp720 - Grandstream Networks DP750 Administration Manual

Setting up DP720 handset

Please follow below steps to insert batteries into the handset:
1. Open the battery compartment cover.
2. Insert the batteries in the correct polarity.
3. Close the battery compartment cover.
Note: Please charge the batteries fully before using the handset for the first time

Battery Information


Technology: Nickel Metal Hydride (Ni-MH)

Size: AAA

Voltage: 1.2V

Capacity: 800mAh

Charging time: 12 hours from empty to full

Standby time: up to 250 hours

Talk time: up to 20 hours' active talk time
In order to get the best performance of your DP720 handset, we recommend using original batteries
provided in the package or batteries compliant with above specifications.
The specifications may differ depending on the age and capacity of the batteries used.
Important Note: Be careful when inserting the batteries into your handset to avoid any risk of short-circuit,
which lead to damage your batteries and/or the handset itself. Do not use damaged batteries which can
increase the risk of serious harm.

Setting up the Charge Station

Please refer to the following steps for setting up the charge station and charging the handset:
1. Connect the DC plug on the power adapter to the micro-USB connector on the charge station.
2. Connect the other end of the power adapter into an electrical power outlet.
3. After setting up the handset and the charge station, place the handset in the charge station.
2
3

Figure 5: Setting up the DP720

DP750/DP720 Administration Guide
1
1. Battery compartment cover
2. Batteries
3. Rear of handset
P a g e | 21