Preparing The Boiler Sections - Viessmann VITOROND 200 Installation Instructions Manual

Boiler section assembly

Preparing the boiler sections

4.
3.
C
1.
Fig. 3
Packing cord
A
(not for the back section)
Solvent
B
For all sections: Clean the hub sealing surfaces.
Adhesive (supplied)
C
For all sections: Apply adhesive and allow to dry
for approx. 5 min.
Danger
Solvent vapours are produced while the adhe-
sive is being used.
Ensure that the boiler room is well ventilated.
Wear a protective mask if necessary.
8
(cont.)
A
5.
2.
B