Comdial Impact 8012S Series User Manual page 61

GCA70-258
5. CHOOSE your speed dial route from the
following list:
•
•
•
•
NOTE: You may need a pause between numbers to compensate for differences
in response time between your system and the host system (ask your attendant
about this). To store a pause, press HOLD, then continue dialing. If your system
is behind a host system that needs a hookflash to access a feature, press TAP to
store a hookflash, then continue dialing.
6. DIAL number (up to 16 digits long).
7. SELECT SAVE to store the number.
8. REPEAT previous steps until all numbers are
stored, OR SELECT EXIT .
9. PRESS SPEAKER to end.
LCD Speakerphone Station User's Guide
PRESS line button to select outside line,
00
DIAL to select prime line or last line
used,
01 16
DIAL to
PRESS INTERCOM button or dial
to select line group,
8
to select intercom.
Programming
Preselect
EXIT
Selecting Line or Intercom
Dial Number
SAVE BKSP EXIT
Dialing a Speed Number
53