Connecting; Basic Safety Instructions - Siemens SIPROCESS GA700 Compact Operating Instructions

Connecting

4.1

Basic safety instructions

Unsuitable cables and/or cable glands
Danger of explosion in hazardous areas.
● Only use cables and cable glands which are appropriate for the application.
● Tighten the cable glands in accordance with the torques specified in the section
● When replacing cable glands, only use ones of the same type.
● After installation check that the cables are seated firmly.
Dangerous contact voltage
Danger of electrocution in case of incorrect electrical connection.
● Information about proper electrical connection is available in section "Technical
● At the mounting location of the device observe the applicable directives and laws for
NOTICE
Formation of condensation in the device
Condensation can be caused by a high difference in temperature between transportation and
storage and the installation location.
● Before taking the device into operation let the device adapt for several hours in the new
Devices in explosion-proof design
Compact Operating Instructions, 05/2015, A5E35134047-02
WARNING
→Technical specifications (Page 79).
WARNING
specifications (Page 79)".
installation of electrical power installations with rated voltages below 1000 V.
environment.
4
37