Safety instructions
2.1
Prerequisites for safe use
In terms of safety, this device left the factory in perfect condition. In order to maintain this status
and to ensure safe operation of the device, observe these instructions and all the information
relevant to safety.
Observe the information and symbols on the device. Do not remove any information or symbols
from the device. Always keep the information and symbols in a completely legible state.
Symbol
2.1.1
Laws and directives
Observe the test certification, provisions and laws applicable in your country during connection,
assembly and operation. These include, for example:
● National Electrical Code (NEC - NFPA 70) (USA)
● Canadian Electrical Code (CEC) (Canada)
Additional provisions for applications in hazardous areas are, for example:
● IEC 60079-14 (international)
● EN 60079-14 (EC)
Devices in explosion-proof design
Compact Operating Instructions, 05/2015, A5E35134047-02
Description
Consult operating instructions
Hot surface
Dangerous electrical voltage
2
17