Introduction
1.7 Transportation and storage
1.7
Transportation and storage
To guarantee sufficient protection during transport and storage, observe the following:
● Keep the original packaging for subsequent transportation.
● Devices/replacement parts should be returned in their original packaging.
● If the original packaging is no longer available, please ensure that all shipments are
sufficiently protected during transport by the replacement packaging. Siemens accepts no
liability for additional costs resulting from damage in transit.
Special conditions for storage and transportation of the device are listed in Chapter "Technical
specifications (Page 79)".
14
CAUTION
Insufficient protection during storage
The packaging only provides limited protection against moisture and infiltration.
● Provide additional packaging as necessary.
Devices in explosion-proof design
Compact Operating Instructions, 05/2015, A5E35134047-02