Engine - Graco GM3500 Instructions-Parts List Manual

NOTE: The engine must be removed before the Field,
Clamp or Clutch Housing can be removed.
1. Working under the mounting plate (A) of the cart,
remove the screw (15) which holds the clutch
housing (2) to the cart. See Fig. 17.
2. Still working under the mounting plate, remove the
two locknuts (48 or 57), and then pull the screws
(14) out of the base of the engine. Disconnect the
red wire (D) from the engine lead (B). Disconnect
the black and white wires (29) from the field. Pull
the wires carefully through the grommets (62)
before removing the engine. See Fig. 17 and 18.
2
A
15
Fig. 17

Engine

14
B
57 or 48
62
3. Lift the engine carefully and place it on a work
bench.
4. Remove the Field and Wiring Harness, Clamp
and Clutch Housing, as instructed on pages 24
and 25.
5. Skip ahead to Reassembly, page 26, Step 1.
NOTE: All service to the engine must be performed by
an authorized HONDA dealer.
To engine alternator.
32
96, 57
or 58, 68
Fig. 18
62
BLACK
WHITE
B
D
RED