Appendix A - Ac30 Firmware Release Notes - Parker LINKnet AC30 Series Product Manual

53
–
Appendix A AC30 Firmware Release Notes
LINKnet firmware version LN 1.7.1 DRV 2.17.2 for the AC30P/D drive
PTP looses lock after 36 hours, affecting Phase Locking applications to lose sync, has been fixed.
Updated the motor firmware to the latest version DRV 2.17.2
LINKnet firmware version LN 1.7.1 DRV 1.17.2 for the AC30V Drive
Updated the motor firmware to the latest version DRV 1.17.2
LINKnet firmware version LN 1.7.1 for the AC30P/D drive DRV 2.16.2
Fixed an issue where the Ethernet LEDs may ramdomly not enable on power up.
The Sequence Logic parameters: Healthy & Output Contactor now function properly.
LINKnet firmware version LN 1.7.1 for the AC30V Drive DRV 1.16.2
The Sequence Logic parameters: Healthy & Output Contactor now function properly.
LINKnet firmware version LN 1.7 for the AC30P/D drive DRV 2.16.2
Initial release of the Phase Locking for the AC30P/D Series.
Initial release of the 690Like Phase Locking for the AC30D Series.
Writing to Modbus / Ethernet IP Register Outputs caused the drive to crash. This has been fixed.
Reading Modbus Input reguisters is now supported.
Corrected some initialization issues with Ethernet IP.
Fixed an issue where there may be random loss of communications between modules.
Fixed an issue where the Node Count block may not update properly.
The Black Box and the Data logger now function in the AC30PD
The Application Trip block is now only active while the drive is running.
LINKnet firmware version LN 1.7 for the AC30V Drive DRV 1.16.2
Writing to Modbus / Ethernet IP Register Outputs caused the drive to crash. This has been fixed.
Reading Modbus Input reguisters is now supported.
Corrected some initialization issues with Ethernet IP.
Fixed an issue where there may be random loss of communications between modules.
Fixed an issue where the Node Count block may not update properly.
The Data logger now functions in the AC30V
The Application Trip block is now only active while the drive is running
LINKnet firmware version LN 1.6.3 for the AC30V and the AC30P/D drive.
The register sampling (for registers such as Reference/Speed Demand) timer was not properly reset
when there is no activity for about 22 minutes. This has been fixed.
AC30 Series LINKnet Product Manual HA474739U001