28
AC30P/D Phase blocks
There are additional function blocks which can be
used on the AC30P/D Series drive for Phase
Control.These drives are considere Advanced
Performance, thus additional blocks can be used and
the blocks are green in color. In the DSE
menu Block / AC30 the additional Phase function blocks are:
Virtual Master, Virtual Slave, Position Loop, Phase Move, Phase Inch, Phase
Tuning, Phase Cam and the Cam Table. Please refer to the AC30 LINKnet
Phase Locking Application Note for a description of these blocks.
AC30 Series LINKnet Product Manual HA474739U001