Chapter 11 – Troubleshooting
Duplicate Node Address
Duplicate IP Address
Active Ethernet connection
AC30 Series LINKnet Product Manual HA474739U001
Refer to the AC30 Series Drive Product Manual HA501718U002 for AC30 drive faults.
If there is a duplicate Node address, meaning that 2 or more nodes have the same Node address, the
GKP (Graphical Key pad) green Run button will flash and the GKP screen backlight will flash off /on,
on the modules that have the duplicate addresses.
If there is a duplicate IP address, meaning that 2 or more modules have the same IP address, the
GKP
(Graphical Key pad) Ethernet icon
the
module which has the duplicate IP address. Also, the GKP backlight will flash off /on.
This modules IP address will be re assigned a temporary address, as its IP address is being used in a
different module. If you go to the menu Parameters / Base Comm / Ethernet State, the Ethernet
State will indicate Duplicate Address.
If there is an active Ethernet connection the Ethernet icon
on the top row of the GKP menu will flash off /on, on
on the top row of the GKP will
50