Example: Configuring A Ts8000 To Communicate To A Ac30V; Step 1: Configuring The Modbus Slave Option Using Dse - Parker LINKnet AC30 Series Product Manual

37

Example: Configuring a TS8000 to Communicate to a AC30V

Step 1: Configuring the Modbus Slave Option using DSE

Step 1.1: Inserting a Modbus Slave Function Block
Display your configuration page. Click on the "Block" menu at the top of the screen.
1. Move the cursor down to select "Ethernet" and select "Ethernet Slave".
2. Click to attach the block icon to the cursor. Move the icon to where you want on the screen. Click
again to release the icon.
AC30 Series LINKnet Product Manual HA474739U001