Siemens SINUMERIK 828D Series Software And Hardware Service Manual page 4

Preface
Target group
This publication is intended for Maintenance and service personnel.
Benefits
The Service Manual enables the addressed target group to perform the servicing and
maintenance in a technically correct and safe manner.
Standard scope
This documentation only describes the functionality of the standard version. Additions or
revisions made by the machine manufacturer are documented by the machine manufacturer.
Other functions not described in this documentation might be executable in the control. This
does not, however, represent an obligation to supply such functions with a new control or when
servicing.
For the sake of simplicity, this documentation does not contain all detailed information about
all types of the product and cannot cover every conceivable case of installation, operation, or
maintenance.
Note regarding the General Data Protection Regulation
Siemens observes standard data protection principles, in particular the principle of privacy by
design. That means that this product does not process / store any personal data, only technical
functional data (e.g. time stamps). If a user links this data with other data (e.g. a shift schedule)
or stores personal data on the same storage medium (e.g. hard drive) and thus establishes a
link to a person or persons, then the user is responsible for ensuring compliance with the
relevant data protection regulations.
Technical Support
Country-specific telephone numbers for technical support are provided in the Internet at the
following address (https://support.industry.siemens.com/cs/sc/2090/) in the "Contact" area.
EC Declaration of Conformity
The EC Declaration of Conformity for the EMC Directive can be found on the Internet at the
following address (https://support.industry.siemens.com/cs/ww/en/ps/14604).
4
Software and hardware
Service Manual, 08/2018, 6FC5397-5DP40-6BA1