Installing The Engine - Yamaha YZF-R1 98 Service Manual

ENGINE
EB400700

INSTALLING THE ENGINE

1. Install:
• spacer 1
• rear m ounting bolts 2
• self-locking nuts 3
• w ashers 4
• left front m ounting bolts 5
• spacer 6
• w asher 7
• right front m ounting bolt 8
NOTE:
• Lubricate the rear
threads w ith lithium soap base grease.
• Do not fully tighten the nuts and bolts.
2. Tighten:
• self-locking nut
• left front m ounting bolts
• right front m ounting bolt
• pinch bolts 9
3. Install:
• shift arm 1
NOTE:
Align the punch m ark a in the shift shaft
w ith the slot in the shift arm .
4. Install:
• drive sprocket cover
NOTE:
Refer to " CABLE ROUTING" in chapter 2.
4 - 7
ENG
m ounting bolt
55 Nm (5.5 m · kg)
40 Nm (4.0 m · kg)
55 Nm (5.5 m · kg)
24 Nm (2.4 m · kg)
10 Nm (1.0 m · kg)
10 Nm (1.0 m · kg)