Explanation Of Features; Monitoring Baby Silently; Operating Range - Philips SBCSC477/05 Instructions For Use Manual

1
2
LIGHT
LEVEL
SYSTEM
SYSTEM
LIGHT
SYSTEM

Explanation of features

Monitoring baby silently

• Set the Single Point Control mode switch (19) on the Parent Unit to
PARENT VOL and adjust the volume of the Parent Unit to the lowest
level with the Single Point Control +/- button (20).
> The sound-level lights (12) visually alert you to baby's sounds.The more
sound your baby makes, the more lights light.
Checking that the units have established a
connection
• Check that the DECT system check light (14) on the Parent Unit lights
continuously (green) to confirm that the connection between both units
is reliable.
> The light flashes red and the system check alarm on the Parent Unit
beeps when:
- the units are not in touch;
- out of range;
- if there is interference.
Switching on the night light
• Push the Baby Unit's night light button to switch the night light on and
off.
> Switch off the night light when operating the Baby Unit on batteries to
conserve power.

Operating range

• The SBC SC477 baby monitor has an open air operating range of up to
300 metres.Walls, ceilings, large objects and even glass will decrease the
operating range. Depending on your local circumstances the operating
range can decrease down to approximately 50 metres.The system check
function (lights 5, 14 and beeping sound on the Parent unit) will in
principle indicate to you the reliability of the connection between the
Parent unit and Baby unit and whether you are out of range.
ENGLISH
11