Using Your Baby Monitor; Features Explanation - Philips SBC SC450 Instructions For Use Manual

ENGLISH
8
POWE R
I

Using your baby monitor

Listening to your baby
Both Parent Units can be used at the same time.
To use the units to listen to your baby:
1
Position the Baby Unit at least 3 feet (1 metre) away from the baby so
that the microphone (6) can pick up baby's sounds.
2
Set the Channel selection switches (5, 15, 26) to the same position on all
units.
3
Press the Power button (3) on the Baby Unit to turn it on.
> The power light (4) lights up (green).
4
Switch on the big Parent Unit using the Volume control - on/off switch
(14) and adjust the volume to the level you prefer.
5
Switch on the small Parent Unit using the Volume control - on/off switch
(25) and adjust the volume to the level you prefer.
6
Allow 10-30 seconds for the units to establish a link.
> The green SYSTEM CHECK lights (11,21) show a steady light when the
Parent Units and the Baby Unit are in touch with each other.
7
Adjust the microphone sensitivity of the Baby Unit to a level you prefer
(using your own voice as a sound reference).
8
Move away from the Baby Unit with the Parent Units.

Features explanation

Monitoring baby silently
•
Adjust the volume on the Parent Units to the lowest level using the
Volume control - on/off switch (14, 25 - do not switch off).
> The sound-level lights (10, 20) visually alert you to the baby's sounds.
The more sound your baby makes, the more lights light up.
> When no sound is detected, all lights will be off.