Page 1
SC479_book.qxd 06-07-2004 09:55 Pagina 1 baby monitor SC479 DECT Instructions for use English 4 Instructions pour l’utilisation Français 18 Modo de empleo Español 32 Bedienungsanleitung Deutsch 46 Gebruiksaanwijzing Nederlands 60 Istruzioni per l’uso Italiano 74 Instruções de uso Português 88...
ENGLISH Your baby monitor SBC SC479 Philips is dedicated to producing caring, reliable products that new moms and dads really need. Products whose reliability and operating quality bring reassurance.You can trust this Philips baby monitor to provide round-the- clock support by ensuring you can always hear your baby clearly, no matter where you are in the house.The 100% Digital DECT 'cordless telephone...
Contents Help line 2 General 4 Important information 4-5 Functional overview 5-6 Getting the baby monitor ready 7-9 Monitoring your baby 9-10 Explanation of features 10-14 Problem solving 15 Technical specifications 16 Resetting to default factory settings 16-17...
Page 6
SC479_book.qxd 06-07-2004 09:55 Pagina 6 ENGLISH B) Parent Unit 17 TALK button 18 Volume Up/Down buttons ( 19 Display informs you on the present status of the Baby Unit 20 MENU button 21 DECT SYSTEM LINK light 22 Charging base 23 Charging light 24 Loudspeaker 25 OK button...
2 Insert four 1.5V, AA size batteries noting the + and - configuration inside the battery compartment. (The batteries are not included; we recommend non-rechargeable Philips Alkaline batteries). 3 Put the battery compartment cover back in place. • Slide the cover upward until it clicks in position.
• Do not mix old and new batteries, or different types of batteries. • Remove Baby Unit batteries if the baby monitor is not to be used for charging base until the batteries are fully charged (at least 16 hours).
SC479_book.qxd 06-07-2004 09:55 Pagina 9 Beltclip Connecting to the Parent Unit 1 Slide the wider side of the clip into the small rectangular recess on the back of the Parent Unit. Make sure the pins on the underside are above the circular recess. 2 Press the clip downwards until it clicks in position.
SC479_book.qxd 06-07-2004 09:55 Pagina 10 ENGLISH Adjusting loudspeaker volume • Use the loudspeaker volume of the Parent Unit. • Use the loudspeaker volume of the Baby Unit. > The displays give visual feedback on the volume settings on the units: Notes: –...
SC479_book.qxd 06-07-2004 09:55 Pagina 11 Checking that the units have established a connection • Check that the DECT SYSTEM LINK light (21) on the Parent Unit lights continuously (green) to confirm that the connection between both units is reliable. > The DECT SYSTEM LINK light blinks green when the units lost Switching the night lights on and off •...
SC479_book.qxd 06-07-2004 09:55 Pagina 12 ENGLISH Playing lullabies 1 Press the five available lullabies. 2 Press the 9 / 2 button (10) to play the selected lullaby. > > If you select ‘Play All’, all lullabies will be played one after another 3 Press the 9 / 2 button (10) again to stop playback.
SC479_book.qxd 06-07-2004 09:55 Pagina 13 3 Press the OK button (25) to confirm your selection. 4 Use the the OK button (25) to confirm. > In some cases ‘Saved’ appears on the display to confirm that an 5 Press the MENU button (20) again to exit the menu. Menu options The options ‘Nightlight’...
(18), select ‘Alert On’ or ‘Off ’ and confirm by pressing the OK button (25). Operating range • The SBC SC479 baby monitor has an open air operating range of up to 300 metres.Walls, ceilings, large objects and even glass will decrease the operating range. Depending on your local circumstances the operating range can decrease down to approximately 50 metres.The system check...
SC479_book.qxd 06-07-2004 09:55 Pagina 15 Problem solving If a fault occurs, first check the points listed below. If you are unable to remedy a problem by following these hints, contact the helpline or consult your dealer. Under no circumstances should you try to repair the set yourself as this will invalidate the guarantee.
SC479_book.qxd 06-07-2004 09:55 Pagina 16 ENGLISH Technical specifications Power supply: Operating temperature: 0 °C to 40 °C Standard: Resetting to default factory settings Factory Initialisation mode With this mode both units can be reset to the default factory settings. Factory Initialisation can be used if problems occur which can not be solved by following the suggestions in chapter ‘Problem solving’.
You can find the number in the list on page 2. Before you call, please read this manual carefully. You will be able to solve most of your problems. The model number of the baby monitor is SBC SC479. Date of purchase: + –...
Page 18
6 meses de garantía para las pilas recargables 6 Monate Garantie auf wiederaufladbare Batterien 6 maanden garantie op oplaadbare batterijen Garanzia di 6 mesi sulle batterie ricaricabili www.philips.com This document is printed on chlorine free produced paper Data subject to change without notice Printed in China...