Table of Contents
Advertisement
SC478_book.qxd 06-07-2004 09:46 Pagina 11
Talking back to comfort your baby
1 On the Parent Unit, press and hold the TALK button (24) until the DECT
SYSTEM LINK lights (3 and 15) of both units blink (green). Then talk
clearly into the loudspeaker grill.
> While the TALK button on the Parent Unit is being pressed, no sounds
from the Baby Unit can be heard on the loudspeaker of the Parent Unit.
2 Release the TALK button when finished or when you wish to hear your
baby again.
Explanation of features
Monitoring baby silently
• Adjust the volume of the Parent Unit to the lowest level, using the
buttons (13).
> The sound-level lights (25) visually alert you to baby's sounds.
The more sound your baby makes, the more lights light.
> When no sound is detected, all lights will be off.
> If the volume of the Parent Unit is set to Off, the Parent Unit will beep
as soon as the second sound-level-light (25) lights red.
Checking that the units have established a
connection
• Check that the DECT SYSTEM LINK light (15) on the Parent Unit lights
continuously (green) to confirm that the connection between both units
is reliable.
> The DECT SYSTEM LINK light blinks green when the units lost
connection with each other. If connection is not established within
30 seconds, DECT SYSTEM LINK light blinks red and the system check
alarm on the Parent Unit beeps every 30 seconds.This beeping can be
suppressed for 3 minutes by pressing any button on one of the units.
ENGLISH
11
+ –
+
Advertisement
Table of Contents
