Seat Adjustments - Toro Groundsmaster 4500-D Operator's Manual

Seat Adjustments

Fore and Aft Adjusting Lever
Pull out on the lever to slide the seat fore or aft
14).
Seat Arm Rest Adjusting Knob
Rotate the knob to adjust the seat arm rest angle.
Seat Back Adjusting Lever
Move the lever to adjust the seat back angle
14).
Weight gauge
Indicates when the seat is adjusted to the weight of
the operator (Figure 14). Height adjustment is made
by positioning the suspension within the range of the
green region.
Figure 14
1. Weight gauge
2. Weight-adjusting lever
3. Fore and Aft adjusting
lever
Weight-Adjusting Lever
Adjust for operator weight
lever to increase the air pressure and push down to
decrease the air pressure. The proper adjustment is
attained when the weight gauge is in the green region.
(Figure
(Figure
4. Seat-back adjusting lever
5. Arm-rest adjusting knob
(not shown-located under
arm rest)
(Figure 14). Pull up on the
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about
your machine such as the operating status, various
diagnostics, and other information about the machine
(Figure 15). There is a splash screen and a main
information screen on the InfoCenter. Press any of
the InfoCenter buttons and then select the appropriate
directional arrow to switch between the splash screen
and the main information screen.
1. Indicator light
2. Right button
•
Left Button (Menu Access/Back Button)—press to
access the InfoCenter menus. You can use it to
back out of any menu you are currently using.
•
Middle Button—press to scroll down menus.
•
Right Button—press to open a menu where a right
arrow indicates additional content.
•
Beeper—activated when lowering the decks or for
advisories and faults.
g008837
Note:
The purpose of each button may change
depending on what is required at the time. Each
button is labeled with an icon displaying its current
function.
20
Figure 15
3. Middle button
4. Left button
g020650