Seat Adjustments - Toro 30873 Operator's Manual

Seat Adjustments

Fore and Aft Adjusting Lever
Pull out on the lever to slide the seat fore or aft
Seat Armrest Adjusting Knob
Rotate the knob to adjust the seat armrest angle
Seat-back Adjusting Lever
Move the lever to adjust the seat-back angle
Weight gauge
Indicates when the seat is adjusted to the weight of the
operator (Figure 17). You can make height adjustments by
positioning the suspension within the range of the green
region.
4
3
2
1
Figure 17
1. Weight-adjusting lever
2. Weight gauge
3. Fore and aft adjusting
lever
Weight-adjusting Lever
Adjust for operator weight
to increase the air pressure and push down to decrease the air
pressure. The proper adjustment is attained when the weight
gauge is in the green region.
Using the InfoCenter LCD Display
The InfoCenter LCD display shows information about your
machine such as the operating status, various diagnostics
and other information about the machine
is a splash screen and main information screen of the
InfoCenter. You can switch between the splash screen and
main information screen, at any time, by pressing any of
(Figure
(Figure
(Figure 17).
5
G024916
4. Seat-back adjusting lever
5. Armrest adjusting knob
(Figure 17). Pull up on the lever
(Figure 18) There
the InfoCenter buttons and then selecting the appropriate
directional arrow.
1
17).
17).
1. Indicator light
2. Right button
•
Left Button, Menu Access/Back Button—press this
button to access the InfoCenter menus. You can use it to
back out of any menu you are currently using.
•
Middle Button—use this button to scroll down menus.
•
Right Button—use this button to open a menu where a
right arrow indicates additional content.
•
Beeper—activated when lowering the decks or for
advisories and faults.
Note: The purpose of each button may change
depending on what is required at the time. Each button
will be labeled with an icon displaying its current function.
21
2
4
3
Figure 18
3. Middle button
4. Left button
g020650