Toro Groundsmaster 4500-D Operator's Manual page 24

Viewing the changing the
Protected Menu Settings
1. In the Protected Menu, scroll down to Protect
Settings.
2. To view and change the settings without entering
a passcode, use the right button to change the
Protect Settings to O
3. To view and change the settings with a
passcode, use the left button to select O
the passcode, and turn the key in the ignition
switch to the O
FF
position.
Setting the Auto Idle
1. In the Settings Menu, scroll down to Auto Idle.
2. Press the right button to change the auto idle
time between O
FF
Setting the Maximum Allowed
Mow Speed
1. In the Settings Menu, Scroll down to Mow Speed
and press the right button.
2. Use the right button to increase the max full
mow speed (50%, 75%, or 100%).
3. Use the center button to decrease the max full
mow speed (50%, 75%, or 100%).
4. Press the left button to exit.
.
FF
position and then to the O
, 8S, 10S, 15S, 20S, and 30S.
Setting the Maximum Allowed
Transport Speed
1. In the Settings Menu, scroll down to Transport
Speed and press the right button.
2. Use the right button to increase the max
transport speed (50%, 75%, or 100%).
3. Use the center button to decrease the max
transport speed (50%, 75%, or 100%).
, set
N
4. Press the left button to exit.
N
Turning the Smart Power ON/OFF
1. In the settings menu, scroll down to Smart
Power.
2. Press the right button to switch between O
O .
FF
3. Press the left button to exit.
Setting the Counterbalance
1. In the Settings Menu, scroll down to Counter
Balance and press the right button.
2. Press the right button to switch between Low,
Med, and High.
When finished with the Protected Menu, press the left
button to exit to the Main Menu, then press the left
button to exit to the Run Menu.
24
and
N