3. Adjustment
Test Inspection Procedure
Check Points
Check item
Firmware version
TB implementation
Exterior
Logo
Lamp cover
Zoom in/out
Keypad
OSD Reset
After inspection is completed, we have to erase all saved change again and restore the OSD default
setting.
The following procedures will allow you to erase all end-users' settings and restore the default settings:
1.
Enter the OSD menu.
2.
Choose "SETUP", and then execute the "Reset" function, and select "All".
42
All firmware must be the latest version.
Related TB must be implemented.
The exterior must be undamaged.
Missing logo, missing prints and blurred prints are unacceptable.
It should be locked in the correct place.
The function should work smoothly.
All keypad buttons must operate smoothly.
Check point