Test Inspection Procedure
Function Inspection
General
All OSD functions must be checked for functionality. When the OSD menu is displayed, there shall
be no visible peaking, ringing, streaking, or smearing artifacts on the screen.
Factory Default
The factory settings (with appropriate centering, size, geometry distortion, etc.) must be displayed
when "Factory Reset" is selected. (page 103 "Factory Reset")
Display Size
All preset modes must expand to full screen size using OSD Horizontal and Vertical Size controls.
Acoustics
High-pitched sound from the cooling fan and filter wheel is unacceptable.
Check points
Check item
Text & Pattern
Exterior
Focus and Zoom
Logo
Screw
Adjustable foot
Plastic Parts
Safety or warning label
Connector
Check point
Missing letters & pattern or blurry prints are
unacceptable.
Dirt, scratches, water ripples and uneven color
are unacceptable.
Focus and Zoom functions work well.
Missing logo, missing prints and blurred prints are
unacceptable
All screws should be fixed and of the right type.
Working correctly
Plastic parts must not be broken or damaged.
All safety and warning labels should be visible,
including all contents.
All interface connectors should be complete and
working.
Test Inspection Procedure
119