Controlling The Machine With A Web Browser; Connecting The Projector & Checking The Lan Setting - Ricoh Sargas-PJ1 Field Service Manual

Controlling the Machine with a Web Browser

1. Connect the PC and the Projector with a LAN cable.
2. Open a Web browser and visit "http:// 192.168.0.100".
3. The web control display appears.
• [A] Power: Turn off the projector.
• [B] Source List: Choose the input signal.
• [C] Tools: Configure the network and password settings.
• [D] Info: Display the projector information.
• [E] ReSync: Re-sync the input signal.
• [F] Mute: Display or blank the video image.
• [G] Freeze/Contrast/Brightness/Color: You can adjust each of these settings.
Connecting the Projector & Checking the LAN Setting
1. Plug the LAN cable into the projector.
2. Turn ON the projector, then press the "Menu" key to access the OSD menu.
3. Select SETUP -> Communications -> LAN.
Network Test
121