Check The Lan Fw Version - Ricoh Sargas-PJ1 Field Service Manual

5. Select "FlashUpgrader_xXX_driver" in the LAN FW update program folder, and then click [OK].
For the driver, select "x32" if the computer's operating system is 32-bit or "x64" if it is 64-bit.
There are two types of 64-bit driver: "amd64" and "ia64". Normally, select "amd64". (It also
includes Intel x64.)
Select "ia64" if the computer's processor is an Itanium.
6. Click [Next].
The driver is installed.
7. After the driver installation is complete, repeat the LAN firmware update procedure from the
beginning.

Check the LAN FW Version

1. Press the "Menu" key to enter the OSD menu.
2. Select "Option" -> "Information".
LAN Firmware Update
137