Beko WMB 51031 PL PT Manual page 56

It does not rinse well.
- The amount, brand and storage conditions
of the detergent used might not be
appropriate.
- Detergent might have been put in the
wrong compartment.
- Machine filter may be clogged.
- Drain hose may be folded.
- Intermediate spins may be skipped.
Clothes stiffened.
- Insufficient amount of detergent used.
- The detergent may have been placed into
the wrong compartment; the detergent may
be mixed with the softener.
Clothes do not smell like the softener.
- Insufficient amount of detergent used.
- The detergent was placed into the wrong
compartment; the detergent was mixed with
the softener.
Detergent residue in the dispensing drawer.
- Detergent may have been put in wet
dispenser drawer.
- Detergent may have gotten damp.
- Water pressure might be low
- The detergent in the main wash
compartment might have gotten wet while
taking in the prewash water..
- Detergent might be mixed with the
bleaching agent.
There is detergent left on the laundry.
- Excessive laundry loaded into machine.
- Wrong Programme and temperature might
have been selected.
- Wrong detergent may have been used.
- Store detergent in a closed and dry location. Do
not keep them under high temperatures.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
- Check the filter.
- Check the drain hose.
- There may be an imbalance of laundry in the
machine.
- The laundry in the drum may be clustered
(bundled laundry in a bag). Laundry should be
rearranged and re-spun.
- No spinning is performed when the laundry is
not evenly distributed in the drum to prevent any
damage to the machine and to its environment.
- If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
- Do not mix the softener with detergent when
putting in the compartment.
- Wash and clean the drawer with hot water.
- If the water hardness is higher, using insufficient
amount of detergent can cause the laundry to
become stiff in time. Use appropriate amount of
detergent according to the water hardness.
- If detergent is put in the prewash compartment
although prewash cycle is not selected, machine
can take this detergent during rinsing or softener
step.
Do not mix the softener with detergent when
putting in the compartment.
Wash and clean the drawer with hot water.
- Dry the detergent drawer before putting in
detergent.
- Store detergent in a closed and dry location.
- Do not keep them under high temperatures.
- The detergent dispenser outlet (holes) may have
a problem.
- There might be problems with the detergent
dispenser valves.
- Do not mix the softener with detergent when
putting in the compartment.
- Do not load the machine in excess.
- Select the proper Programme and temperature
for the laundry to be washed.
- Use wool detergents for woollens.
59
EN