Auxiliary Functions; Time Display - Beko WMB 51031 PL PT Manual

Auxiliary functions

Auxiliary Function Selection Buttons
Select the required auxiliary functions
before starting the program.
Furthermore, you may also select
or cancel auxiliary functions that are
suitable to the running program without
pressing the "Start/Pause" button. To
select or cancel the auxiliary functions,
the machine must be at any prior stage
than the auxiliary function to be selected
or cancelled. If the auxiliary function
cannot be selected or cancelled, light of
the relevant auxiliary function will blink 3
times to warn the user.
C Some combinations cannot be selected
together. Ex.: Pre-wash and Quick
Wash. Warning light of the selected
auxiliary function will light up.
Auxiliary function selection
If an auxiliary function that is not
compatible with the previously selected
auxiliary function is chosen, the function
selected first will be cancelled and
the last auxiliary function selection will
remain active.
Ex.: If you want to select pre-wash first
and then quick wash, pre-wash will be
cancelled and quick wash will remain
active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see, "Program Selection Table")
C Auxiliary function buttons may differ
according to the model of your
machine.
• Pranie wstępne (Prewash)
A pre-wash is only worthwhile for heavily
soiled laundry. Without pre-wash you
save energy, water, detergent and
time. Pre-wash without detergent is
recommended for lace and curtains.
• Szybkie pranie (Quick Wash)
This function can be used for "Cottons"
and "Synthetics" programs. It decreases
the washing times for lightly soiled
laundries and also the number of rinsing
steps.
C Recommended load capacity is half
of the maximum load capacity of the
selected program.
• Rinse Plus
This function enables your machine to
make another rinsing in addition to the
one already made after the main wash.
Thus, the risk for sensitive skins (babies,
allergic skins and etc.) to be effected by
the minimal detergent remnants on the
laundry can be reduced.
• Anti-Creasing
With this function, drum movement will
be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level.
• Rinse Hold
If you are not going to unload your
clothes immediately after the program
completes, you may use rinse hold
function and keep your laundry in the
final rinsing water in order to prevent
them become wrinkled when there is
no water in the machine. Press "Start/
Pause" button after this process if
you want to drain the water without
spinning. Program resumes. Your
machine drains the water and program
completes.
If you want to spin your laundry that you
left in water:
- Adjust the spin speed.
- Press Start/Pause button
Program resumes. Your machine
drains the water, spins the laundry and
program completes.
In case of selecting the auxiliary
function for soaking, your laundry will
be kept in detergent water before the
washing process starts. Hence, stains
that ingrained into the laundry can be
removed better.
• Funkcja Pupil (Pet hair removal)
This function helps you to remove the
pet hairs that remain on your clothes.
When this function is selected, your
machine adds pre-wash and additional
rinsing steps to the normal program
cycle. Thus, pet hairs are removed more
effectively by performing the washing
with more water (30%).
A Never wash your pets in your washing
machine.

Time display

The display shows the time remaining
for the program to complete while a
program is running. Time is displayed in
hours and minutes as "01:30".
50
EN