Engine Maintenance: Kubota - Husqvarna CRT 48-35L Operator's Manual

Engine Maintenance: Kubota

8 Engine Maintenance: Kubota
The information in this chapter comes from copyrighted Kubota material.
The viscosity of the engine oil is an important factor when determining the correct
engine oil to use in your machine. Use an engine oil of appropriate viscosity based
on the expected outside air temperature. See the table below.
WARNING
Most used liquids from this machine such as oil, gasoline, grease, etc., contain
small amounts of materials that can cause cancer and other health problems if
inhaled, ingested, or left in contact with skin for prolonged periods of time.
► Take steps to avoid inhaling or ingesting used liquids.
► Wash skin thoroughly after exposure to used liquids.
Engine oil should have properties of API classification
SL or higher.
Change the type of engine oil according to the
ambient temperature.
Above 25 C (77 F)
0 C to 25 C (32 F to 77 F)
0 C to -20 C (32 F to -4 F)
When using oil of different brands from the previous
one, be sure to drain all the previous oil before adding
the new engine oil.
SAE30 or SAE10W-30
SAE15W-40
SAE20 or SAE10W-30
SAE10W or SAE10W-30
770083
72
wc_tx004037gb_FM10.fm