Machine Disposal / Decommissioning - Husqvarna CRT 48-35L Operator's Manual

General Maintenance
5.11

Machine Disposal / Decommissioning

Introduction This machine must be properly decommissioned at the end of its service life.
Responsible disposal of recyclable components, such as plastic and metal,
ensures that these materials can be reused—conserving landfill space and
valuable natural resources.
Responsible disposal also prevents toxic chemicals and materials from harming
the environment. The operating fluids in this machine, including fuel, engine oil,
and grease, may be considered hazardous waste in many areas. Before
decommissioning this machine, read and follow local safety and environmental
regulations pertaining to the disposal of construction equipment.
Preparation Perform the following tasks to prepare the machine for disposal.
 Move the machine to a protected location where it will not pose any safety
hazards and cannot be accessed by unauthorized individuals.
 Ensure that the machine cannot be operated from the time of final shutdown to
disposal.
 Drain all fluids, including fuel, engine oil, and coolant.
 Seal any fluid leaks.
 Remove the battery.
Disposal Perform the following tasks to dispose of the machine.
 Disassemble the machine and separate all parts by material type.
 Dispose of recyclable parts as specified by local regulations.
 Dispose of all non-hazardous components that cannot be recycled.
 Dispose of waste fuel, engine oil, and hydraulic fluid in accordance with local
environmental protection regulations.
64
CRT48
wc_tx004194gb_FM10.fm